View SML-Z14U4TT86_8499682.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

l features l outline ? high brightness ?? plcc2 package l size l dimensions l recommended solder pattern l specifications typ. i f max. v r min.* 2 typ. max.* 2 i f min. typ. i f (v) (ma) ( m a) (v) (nm) (nm) (nm) (ma) (mcd) (mcd) (ma) sml-z14vt(a) 625 630 635 56 112 sml-z14ut(a) 615 620 625 112 224 sml-z14dt(a) 602 605 608 sml-z14yt(a) 586 589 592 sml-z14mt(a) 568 571 574 45 90 sml-z14ft(a) 561.5 564 566.5 22.4 45 sml-z14pt(a) 557 560 563 11.2 22.4 sml-z14v4t 625 630 635 140 280 sml-z14u4t 615 620 625 280 560 sml-z14d4t 602 605 608 sml-z14y4t 587 590 593 sml-z14m4t 569 572 575 112 224 sml-z14f4t 562 565 568 56 120 sml-z14p4t 558 561 564 22.4 56 smlz14egt(a) 3.4 10 5 519 528 536 710 1100 smlzn4bgt(a) 464 470 476 220 300 1800 2400 *1:duty1/10, 1khz *2:reference sml-z1 / zn series smlzn4wbguw(a) - 40 to + 85 3.3 green white 168 175 189 bluish green 120 yellowish green 1.9 2.0 2.0 2.1 12 12 - 40 to + 100 - 40 to + 100 - 40 to + 100 - 40 to + 100 20/50ma guaranteed specifications part no. chip structure i fp (ma) v r (v) topr(oc) p d (mw) i f (ma) electrical and optical characteristics (ta=25oc) voltage reverse forward voltag v f reverse current i r dominant wavelength l d luminous intensity i v storage temp. 70 200* 1 color emitting current peak forward tstg(oc) ingan 70 200* 1 blue red orange yellow yellowish green 114 - 40 to + 100 orange yellow aigainp green red absolute maximum ratings (ta=25oc) power forward current dissipation operating temp. 20 20 12 20 50 12 50 355 710 140 280 50 10 100 20 20 20 - - (x, y) (0.30, 0.28) 30 100* 1 5 0.9 - 40 to + 100 (unit : mm) tolerance : ? 0.2 (unit : mm) color type v u d y f p e b wb m actual size 3528 (1411) 3.5 2.8mm (t=1.9mm) cathode index 1/11 2016.03 - rev.g downloaded from: http:/// data s he et www.rohm.com ? 2015 rohm co., ltd. all rights reserved.
www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet sml-z1 / zn series l electrical characteristics curves 10 100 1.6 1.8 2.0 2.2 2.4 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 -40 -20 0 20 40 60 80 100 0.0 1.0 2.0 3.0 4.0 0 10 20 30 40 50 60 70 0 20 40 60 80 -40 -20 0 20 40 60 80 100 fig.1 forward current - forward voltages forward current : i f [ma] forward voltage : v f [v] fig.2 luminous intensity - atmosphere temperature relative luminous intensity [a.u.] atmosphere temperature : ta [oc] fig.3 luminous intensity - forward current relative luminous intensity forward current : i f [ma] fig.4 derating maximum forward current : [ma] ambient temperature : ta [oc] ta=25 oc ta=25 oc i f =20ma sml-z14vt(a) sml-z14ut(a) sml-z14dt(a) sml-z14yt(a) sml-z14mt(a) sml-z14ft(a) sml-z14pt(a) sml-z14vt(a) sml-z14ut(a) sml-z14dt(a) sml-z14yt(a) sml-z14mt(a) sml-z14ft(a) sml-z14pt(a) sml-z14vt(a) sml-z14ut(a) sml-z14dt(a) sml-z14yt(a) sml-z14mt(a) sml-z14ft(a) sml-z14pt(a) sml-z14vt(a) sml-z14ut(a) sml-z14dt(a) sml-z14yt(a) sml-z14mt(a) sml-z14ft(a) sml-z14pt(a) 2/11 2016.03 - rev.g downloaded from: http:///
www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet sml-z1 / zn series l electrical characteristics curves 0.0 0.4 0.8 1.2 1.6 0 10 20 30 40 50 60 70 0 20 40 60 80 -40 -20 0 20 40 60 80 100 10 100 1.6 1.8 2.0 2.2 2.4 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 -40 -20 0 20 40 60 80 100 fig.1 forward current - forward voltages forward current : i f [ma] forward voltage : v f [v] fig.2 luminous intensity - atmosphere temperature relative luminous intensity [a.u.] atmosphere temperature : ta [oc] fig.3 luminous intensity - forward current relative luminous intensity forward current : i f [ma] fig.4 derating maximum forward current : [ma] ambient temperature : ta [oc] ta=25 oc ta=25 oc i f =50ma sml-z14v4t sml-z14u4t sml-z14d4t sml-z14y4t sml-z14m4t sml-z14f4t sml-z14p4t sml-z14v4t sml-z14u4t sml-z14d4t sml-z14y4t sml-z14m4t sml-z14f4t sml-z14p4t sml-z14v4t sml-z14u4t sml-z14d4t sml-z14y4t sml-z14m4t sml-z14f4t sml-z14p4t sml-z14v4t sml-z14u4t sml-z14d4t sml-z14y4t sml-z14m4t sml-z14f4t sml-z14p4t 3/11 2016.03 - rev.g downloaded from: http:///
www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet sml-z1 / zn series l electrical characteristics curves 1 10 100 2.0 2.5 3.0 3.5 4.0 0.4 0.6 0.8 1 1.2 1.4 1.6 -40-30-20-10 0 10 20 30 40 50 60 70 80 90 100 0.0 0.5 1.0 1.5 0 5 10 15 20 25 30 0 10 20 30 40 - 40 - 30 - 20 - 10 0 10 20 30 40 50 60 70 80 90 100 fig.1 forward current - forward voltages forward current : i f [ma] forward voltage : v f [v] fig.2 luminous intensity - atmosphere temperature relative luminous intensity [a.u.] atmosphere temperature : ta [oc] fig.3 luminous intensity - forward current relative luminous intensity forward current : i f [ma] fig.4 derating maximum forward current : [ma] ambient temperature : ta [oc] ta=25 oc ta=25 oc i f =20ma r j-s 150oc/w r j-a 250oc/w tjmax 120oc smlz14egt(a) smlzn4bgt(a) smlzn4wbguw(a) smlz14egt(a) smlzn4bgt(a) smlzn4wbguw(a) smlz14egt(a) smlzn4bgt(a) smlzn4wbguw(a) smlz14egt(a) smlzn4bgt(a) smlzn4wbguw(a) 4/11 2016.03 - rev.g downloaded from: http:///
www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet sml-z1 / zn series l spectrum data * please take this data as a reference data for the sam ples are measured randomly. * the data is relativized for each color. it is not to show the spectrum peaks are equal. l viewing angle 0 0.2 0.4 0.6 0.8 1 380 480 580 680 780 0 0.2 0.4 0.6 0.8 1 380 480 580 680 780 0 0.2 0.4 0.6 0.8 1 380 480 580 680 780 sml-z14vt(a) sml - z14ut(a) sml - z14dt(a) sml - z14yt(a) sml - z14mt(a) sml-z14ft(a) sml-z14pt(a) intensity [a.u.] wavelength [nm] intensity [a.u.] wavelength [nm] i f =50ma scanning angle (deg) relative intensity scanning angle (deg) relative intensity i f =20ma sml-z14v4t sml -z14u4t sml -z14d4t sml -z14y4t sml - z14m4t sml-z14f4t sml-z14p4t intensity [a.u.] wavelength [nm] smlz14egt(a) smlzn4bgt(a) i f =20ma sml-z14/zn series sml-z14/zn series 5/11 2016.03 - rev.g downloaded from: http:///
www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet sml-z1 / zn series l rank reference of brightness * please note that the brightness of some products may fall between ranks (half rank). red(v,u) (ta=25oc, i f 20ma) rank am an ap aq ar as at au av aw ax ay az ba bb bc bd be iv (mcd) 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 1 12 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 3 55 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 sml-z14vt(a) sml-z14ut(a) (ta=25oc, i f 50ma) rank am an ap aq ar as at au av aw ax ay az ba bb bc bd be iv (mcd) 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 1 12 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 3 55 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 sml-z14v4t sml-z14u4t orange(d) (ta=25oc, i f 20ma) rank am an ap aq ar as at au av aw ax ay az ba bb bc bd be iv (mcd) 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 1 12 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 3 55 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 sml-z14dt(a) (ta=25oc, i f 50ma) rank am an ap aq ar as at au av aw ax ay az ba bb bc bd be iv (mcd) 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 1 12 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 3 55 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 sml-z14d4t yellow(y) (ta=25oc, i f 20ma) rank am an ap aq ar as at au av aw ax ay az ba bb bc bd be iv (mcd) 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 1 12 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 3 55 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 sml-z14y t(a) (ta=25oc, i f 50ma) rank am an ap aq ar as at au av aw ax ay az ba bb bc bd be iv (mcd) 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 1 12 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 3 55 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 sml-z14y 4t green(m,p) (ta=25oc, i f 20ma) rank ag ah aj ak al am an ap aq ar as at au av aw ax ay az iv (mcd) 9 to 11.2 11.2 to 14 14 to 18 18 to 22.4 22.4 to 28 28 t o 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 3 55 to 450 450 to 560 sml-z14mt(a) sml-z14pt(a) sml-z14ft(a) (ta=25oc, i f 50ma) rank ag ah aj ak al am an ap aq ar as at au av aw ax ay az iv (mcd) 9 to 11.2 11.2 to 14 14 to 18 18 to 22.4 22.4 to 28 28 t o 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 3 55 to 450 450 to 560 sml-z14m4t sml-z14p4t sml-z14f4t bluish green(e) (ta=25oc, i f 20ma) rank s1 s2 t1 t2 u1 u2 v1 v2 w1 w2 x1 x2 y1 y2 z1 z2 iv (mcd) 90 to 110 110 to 140 140 to 180 180 to 220 220 to 280 280 to 360 3 60 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 280 0 to 3600 smlz14egt(a) blue(b) (ta=25oc, i f 20ma) rank s1 s2 t1 t2 u1 u2 v1 v2 w1 w2 x1 x2 y1 y2 z1 z2 iv (mcd) 90 to 110 110 to 140 140 to 180 180 to 220 220 to 280 280 to 360 3 60 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 280 0 to 3600 smlzn4bgt(a) white(wb) (ta=25oc, i f 20ma) (ta=25oc, i f 20ma) rank s1 s2 t1 t2 u1 u2 v1 v2 w1 w2 x1 x2 y1 y2 z1 z2 z3 iv (mcd) 90 to 110 110 to 140 140 to 180 180 to 220 220 to 280 280 to 360 3 60 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 280 0 to 3600 3600 to 4500 smlzn4wbguw(a) 6/11 2016.03 - rev.g downloaded from: http:///
sml-z1 / zn series l chromaticity diagram [chromaticity coordimates] (ta=25oc, i f 20ma) measurement tolerance : ? 0.01 cie y cie x smlzn4wbguw1(a) x y x y x y x y x y 0.296 0.259 0.291 0.268 0.296 0.259 0.291 0.268 0.305 0.272 0.291 0.268 0.285 0.279 0.291 0.268 0.285 0.279 0.301 0.283 0.280 0.252 0.273 0.261 0.301 0.283 0.296 0.296 0.310 0.297 0.286 0.244 0.280 0.252 0.305 0.272 0.301 0.283 0.313 0.284 x y x y x y x y x y 0.301 0.283 0.310 0.297 0.307 0.312 0.320 0.313 0.319 0.330 0.296 0.296 0.320 0.313 0.319 0.330 0.329 0.328 0.329 0.345 0.307 0.312 0.321 0.296 0.320 0.313 0.329 0.308 0.329 0.328 0.310 0.297 0.313 0.284 0.310 0.297 0.321 0.296 0.320 0.313 c d e f g h j k l m d e f k c j h m l g 7/11 2016.03 - rev.g downloaded from: http:/// www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet
sml-z1 / zn series l taping l part no. construction l packing specification rohm led products are being shipped with desiccant (silica gel) conclud ed in moisture-proof bags. pasting the moisture sensitive label on the outer surface of the moisture-p roof bags or enclosing the humidity indication card inside the bag is available upon request. please contact the nearest sales office or distributer if necessary. (unit : mm) (note ) tolerance is ? 0. 2mm, unless otherwise specified. cathode mark packing quantity 2000pcs/reel pull direction 8/11 2016.03 - rev.g downloaded from: http:/// www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet
www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet sml-z1 / zn series 201 6 .0 3 - rev. g 9/11 l precaution (surface mount device) 1.storage if the product is heated during the reflow under the condition of hygroscopic state, it may vaporize and expand which will influence the performance of the product. therefore, the package is waterproof. please use the product following the conditions: ? using conditions classification temperature humidity expiration date remark 1 before using 5 to 30oc 30 to 70%rh within 1 year from receiving storage with waterproof package 2 after opening package 5 to 30oc below 70%rh within72h please storing in the airtight container with our desiccant (silica gel) ? bakingbake the product in case of below: 1 the expiration date is passed. 2 the color of indicator (silica gel) turned from blue to colorless or from green to pink. (even if the product is within the expiration date.)? baking conditions temperature time humidity 603oc 40 to 48h below 20%rh remark ? bake products in reel.? reel and embossed tape are easy to be deformed when baking, so please try not to apply stress on it. ? recommend bake once. 2.application methods 2-1. precaution for drive system and off mode design the circuit without the electric load exceeding the absolute maximum rating that applies on the products. if drive by constant voltage, it may cause current deviation of the led and result in deviation of luminous intensity, so we recommend to drive by constant current. (deviation of vf value will cause deviation of current in led.) furthermore, for off mode, please do not apply voltage neither forward nor reverse. especially, for the products with the ag-paste used in the die bonding, theres high possibility to cause electro migration and result in function failure. 2-2. operation life span theres possibility for intensity of light drop according to working conditions and environments (applied current, surrounding temperature and humidity, corrosive gases), please call our sales staffs for inquiries about the concerned application below. 1 longtime intensity of light life 2 on mode all the time 2-3.applied stress on product the top of the led is very soft, which the silicon resin is used as sealing resin. therefore, please pay attention to the overstress on it which may influence its reliability. 2-4.usage the product is led. we are not responsible for the usage as the diode such as protection chip, rectifier, switching and so on. downloaded from: http:///
www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet sml-z1 / zn series 201 6 .0 3 - rev. g 10/11 3. others 3-1. surrounding gas notice that if it is stored under the condition of acid gas (chlorine gas, sulfured gas) or alkali gas (ammonia), it may result in low soldering ability (caused by the change in quality of the plating surface ) or optical characteristics changes (light intensity, chrominance) and change in quality of die bonding (ag-paste) materials. all of the above will cause function failure of the products. therefore, please pay attention to the storage environment for mounted product (concern the generated gas of the surrounding parts of the products and the atmospheric environment). 3-2. electrostatic damage the product is part of semiconductor and electrostatic sensitive, theres high possibility to be damaged by the electrostatic discharge. please take appropriate measures to avoid the static electricity from human body and earthing of production equipment. the resistance values of electrostatic discharge (actual values) vary with products, therefore, please call our sales staffs for inquiries. 3-3. electromagnetic wave please concern the influence on led in case of application with strong electromagnetic wave such as ih (induction heating). 4.mounting 4-1. soldering ? no resin hardening agent such as filler is used in the sealing resin of the product. therefore, resin expansion and moisture absorption at humidity will cause heat stress during soldering process and finally has bad influence on the products reliability. ? the product is not for flow soldering. ? do not expose the product in the environment of high temperature (over 100oc) or rapid temperature shift (within 3oc of temperature gradient) during the flow soldering of surrounding parts. ? please set appropriate reflow temperature based on our product usage conditions and specification.? the max for reflowing is 2 times, please finish the second flow soldering and flow soldering with other parts within the usage limitation after open the moistureproof package. ? compare with n2 reflow, during air reflow, because of the heat and surrounding conditions, it may cause the discoloration of the resin. 4-2. automatic mounting 4-2-1.silicon resin sealing product the sealing resin of led is very soft, so please select adsorption nozzle that would not apply stress directly on the sealing section. 4-2-2.mini package(smaller than 1608 size) vibration may result in low mounting rate since it will cause the static electricity of product and adhere to top cover tape. we recommend to ? set magnet on parts feeder cassette of the mounter to control the product stabilization ? set ionizer to prevent electrostatic charge 4-3. mounting location the stress like bending stress of circuit board dividing after mounting, may cause led package crack or damage of led internal junction, therefore, please concern the mounting direction and position to avoid bending or screwing with great stress of the circuit board. downloaded from: http:///
www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet pcb bonding direction 2.6mm sml-z1 / zn series 201 6 .0 3 - rev. g 11/11 4-5. soldering pattern for recommendation we recommend the soldering pattern that shows on the right. it will be different according to mounting situation of circuit board, therefore, please concern before designing. * the product has adopted the electrode structure that it should solder with back electrode of the product. 4-6. reflow profile for reflow profile, please refer to the conditions below:( * ) ? meaning of marks, conditions mark meanings conditions ts max maximum of pre-heating temperature 180oc ts min minimum of pre-heating temperature 140oc ts time from ts min to ts max over 60sec. t l reference temperature 230 to 250oc t l retention time for t l within 40sec. t p peak temperature 250oc(max) t p time for peak temperature within 10sec. t r /t temperature rising rate under 3oc/sec. t d /t temperature decreasing rate over -3oc/sec. * above conditions are for reference. therefore, evaluate by customers own circuit boards and reflow furnaces before using, because stress from circuit boards and temperature variations of reflow furnaces vary by customers own conditions. 4-7. cleaning after soldering please follow the conditions below if the cleaning is necessary after soldering. solvent we recommend to use alcohols solvent such as, isopropyl alcohols temperature under 30oc within 3 minutes ultrasonic cleaning 15w / below 1 liter (capacity of tank) drying under 100oc within 3 minutes stress strength according tothe mounting position: a>b>c>d 4-4. mechanical stress after mounting the mechanical stress may damage the led after circuit mounting, so please pay attention to the touch on product. downloaded from: http:///
r1102 a www.rohm.com ? 2015 rohm co., ltd. all rights reserved. notice ro hm cu stome r s upport sy s tem h ttp :// www.r oh m .co m/ co n tact / thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. no tes the information contained herein is subject to change without notice. before you use our products, pl ease contact our sales representative and verify th e la tes t specifica - tion s : alt hou gh rohm is contin uous ly wor ki ng to im pr ove p ro du ct r eli a bility and qualit y, semicon - du c tor s c an bre a k d ow n and ma lf un ct io n du e to var io us f ac to rs. th e re fore, in or der to prevent pe r so nal in ju ry or fi re ar isi ng f ro m fa ilur e, please ta ke sa f ety mea s ur es su ch as com plyin g wi th th e de r at in g ch ara ct er ist ic s, impl e menting redundant and f ir e preve nt ion designs, and u tilizin g ba ck up s a nd f ail - sa fe p ro ce du re s. ro hm shall have no responsibility for any damages arising out of the use of our poducts b ey ond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not gr ant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as ex emplified bel ow), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10)11) 12) 13) 14) downloaded from: http:///

▲Up To Search▲

Price & Availability of SML-Z14U4TT86

	To Download SML-Z14U4TT86 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .